%%
%% This is file `curve.cls',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% curve.dtx 
%% 


%% Copyright (C) 2000-2003 Didier Verna

%% This file is part of CurVe.

%% CurVe may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.1
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.1 or later is part of all distributions of LaTeX
%% version 1999/06/01 or later.

%% CurVe consists of the files listed in the file `README'.

%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
\NeedsTeXFormat{LaTeX2e}

\ProvidesClass{curve}[2003/04/29 v1.4
                      Curriculum Vitae class for LaTeX2e]

\RequirePackage{ltxtable}
\RequirePackage{calc}

\newif\ifstrok\strokfalse
\def\strtest#1#2{%
  \def\@strone{#1}\def\@strtwo{#2}%
  \ifstrok\else\ifx\@strone\@strtwo\stroktrue\fi\fi}

\gdef\@nextentry{}

\def\@keyfont{}
\newcommand\keyfont[1]{\gdef\@keyfont{#1}}

\def\@prefix{\textbullet}
\newcommand\prefix[1]{\gdef\@prefix{#1}}

\newcommand\@entry[2][]{%
  \@nextentry
  \gdef\@nextentry{}%
  \gdef\@beforespace{-\subrubricbeforespace}%
  #1&\@prefix&#2\\}

\newcommand\@sentry[1][]{%
  \@nextentry
  \gdef\@nextentry{\\}%
  \gdef\@beforespace{-\subrubricbeforespace}%
  #1&\@prefix&}

\newcommand\entry{\@ifstar{\@sentry}{\@entry}}

\def\@subrubricfont{\Large\itshape}
\newcommand\subrubricfont[1]{\gdef\@subrubricfont{#1}}

\newlength\subrubricbeforespace
\setlength\subrubricbeforespace{10pt}

\newlength\subrubricspace
\setlength\subrubricspace{5pt}

\newcommand\subrubric[1]{%
  \@nextentry
  \gdef\@nextentry{}%
  &\multicolumn{2}{l}{%
    \raisebox{\@beforespace}{\@subrubricfont#1}%
    \par\vspace{\subrubricspace}}\\}

\newlength{\@almosttextwidth}
\AtBeginDocument{\setlength\@almosttextwidth{\textwidth-\hfuzz}}

\def\@rubricfont{\Large\bfseries}
\newcommand\rubricfont[1]{\gdef\@rubricfont{#1}}

\newlength\rubricspace
\setlength\rubricspace{10pt}

\def\@rubrichead#1{%
  \multicolumn{3}{@{}c}{%
    \@rubricfont%
    \makebox[\@almosttextwidth][c]{#1}\par\vspace\rubricspace}\\}

\newcommand\continuedname[1]{\gdef\@continuedname{#1}}

\newenvironment{rubric}[1]{%
  %% \begin{rubric}
  \gdef\@beforespace{0pt}%
  \gdef\@nexentry{}%
  \begin{longtable}{@{}>{\@keyfont}ll@{~}X}
    \@rubrichead{#1}
    \endfirsthead
    \@rubrichead{#1\@continuedname}
    \endhead}{%
    %% \end{rubric}
    \@nextentry
  \end{longtable}}

\newlength\photo@width
\newlength\leftheader@width
\newlength\rightheader@width

\def\photo@scale{.1}
\newcommand\photoscale[1]{\gdef\photo@scale{#1}}
\@onlypreamble\photoscale

\newlength\photosep
\setlength\photosep{10pt}

\def\header@scale{.5}
\newcommand\headerscale[1]{\gdef\header@scale{#1}}
\@onlypreamble\headerscale

\newlength\headerspace
\setlength\headerspace{10pt}

\def\@leftheader{%
  \ClassError{curve}{No \protect\leftheader\space given}{%
    You have called \protect\makeheaders, %
    but you didn't provide a left header.\MessageBreak
    Type X <return> to quit, add a call to \protect\lefheader\space %
    in the preamble of your CV,\MessageBreak
    and rerun LaTeX.}}
\newcommand\leftheader[1]{\gdef\@leftheader{#1}}
\@onlypreamble\leftheader

\def\@rightheader{%
  \ClassError{curve}{No \protect\rightheader\space given}{%
    You have called \protect\makeheaders, %
    but you didn't provide a right header.\MessageBreak
    Type X <return> to quit, add a call to \protect\rightheader\space %
    in the preamble of your CV,\MessageBreak
    and rerun LaTeX.}}
\newcommand\rightheader[1]{\gdef\@rightheader{#1}}
\@onlypreamble\rightheader

\def\includephoto@t{%
  \raisebox{.7\baselineskip-\height}{%
    \includegraphics[width=\photo@width]{\photo@file}}}

\def\includephoto@c{%
  \raisebox{-.5\height}{%
    \includegraphics[width=\photo@width]{\photo@file}}}

\def\includephoto@b{\includegraphics[width=\photo@width]{\photo@file}}

\def\makeheaders@l#1{%
  \setlength\photo@width{\photo@scale\textwidth}
  \setlength\leftheader@width{%
    (\textwidth - \photo@width - \photosep) * \real{\header@scale}}
  \setlength\rightheader@width{%
    \textwidth - \photo@width - \photosep - \leftheader@width}
  \parbox[#1]{\photo@width + \photosep}{\includephoto@\hspace\photosep}%
  \parbox[#1]{\leftheader@width}{\@leftheader}%
  \parbox[#1]{\rightheader@width}{\raggedleft\@rightheader}}

\def\makeheaders@c#1{%
  \setlength\photo@width{\photo@scale\textwidth}
  \setlength\leftheader@width{(\textwidth - \photo@width) * \real{.5}}
  \setlength\rightheader@width{\leftheader@width}
  \parbox[#1]{\leftheader@width}{\@leftheader}%
  \parbox[#1]{\photo@width}{\includephoto@}%
  \parbox[#1]{\rightheader@width}{\raggedleft\@rightheader}}

\def\makeheaders@r#1{%
  \setlength\photo@width{\photo@scale\textwidth}
  \setlength\leftheader@width{%
    (\textwidth - \photo@width - \photosep) * \real{\header@scale}}
  \setlength\rightheader@width{%
    \textwidth - \photo@width - \photosep - \leftheader@width}
  \parbox[#1]{\leftheader@width}{\@leftheader}%
  \parbox[#1]{\rightheader@width}{\raggedleft\@rightheader}%
  \parbox[#1]{\photo@width + \photosep}{\hspace\photosep\includephoto@}}

\def\makeheaders@#1{%
  \setlength\leftheader@width{\header@scale\textwidth}%
  \setlength\rightheader@width{\textwidth - \leftheader@width}%
  \parbox[#1]{\leftheader@width}{\@leftheader}%
  \parbox[#1]{\rightheader@width}{\raggedleft\@rightheader}}

\newcommand\photo[2][l]{%
  \RequirePackage{graphicx}
  \strokfalse\strtest{#1}{l}\strtest{#1}{r}\strtest{#1}{c}%
  \ifstrok\else\ClassError{curve}{Invalid argument to \protect\photo}{%
    Argument 2 of \protect\photo must be `l', `r' or `c'.}\fi
  \def\tmp@cmd{\global\let\makeheaders@}
  \expandafter\tmp@cmd\csname makeheaders@#1\endcsname
  \gdef\photo@file{#2}}
\@onlypreamble\photo

\newcommand\makeheaders[1][c]{%
  \strokfalse\strtest{#1}{t}\strtest{#1}{b}\strtest{#1}{c}%
  \ifstrok\else\ClassError{curve}{Invalid argument to \protect\makeheaders}{%
    Argument of \protect\makeheaders must be `t', `b' or `c'.}\fi
  \def\tmp@cmd{\global\let\includephoto@}
  \expandafter\tmp@cmd\csname includephoto@#1\endcsname
  \makeheaders@{#1}%
  \par\vspace\headerspace}

\def\@titlefont{\Huge\bfseries}
\newcommand\titlefont[1]{\gdef\@titlefont{#1}}
\@onlypreamble\titlefont

\@onlypreamble\title

\let\@subtitle\@undefined
\newcommand\subtitle[1]{\gdef\@subtitle{#1}}
\@onlypreamble\subtitle

\def\@subtitlefont{\huge\itshape}
\newcommand\subtitlefont[1]{\gdef\@subtitlefont{#1}}
\@onlypreamble\subtitlefont

\newlength\titlespace
\setlength\titlespace{0pt}

\newcommand\maketitle{%
  \begin{center}
    {\@titlefont\@title}
    \ifx\@subtitle\@undefined\else\\\@subtitlefont\@subtitle\fi
  \end{center}
  \vspace\titlespace}

\let\@flavor\empty
\newcommand\flavor[1]{\gdef\@flavor{#1}
  \ifx\@flavor\empty\else\edef\@flavor{.\@flavor}\fi}

\DeclareOption{ask}{%
  \typein[\@flavor]{Please specify a CV flavor (none by default):}
  \ifx\@flavor\empty\else\edef\@flavor{.\@flavor}\fi}

\def\@curveinput#1{%
  \IfFileExists{#1\@flavor.ltx}{\@iinput{#1\@flavor.ltx}}{%
    \IfFileExists{#1\@flavor.tex}{\@iinput{#1\@flavor.tex}}{%
      \IfFileExists{#1.ltx}{\@iinput{#1.ltx}}{%
        \IfFileExists{#1.tex}{\@iinput{#1.tex}}{%
          \@iinput{#1}}}}}}
\renewcommand\input{\@ifnextchar\bgroup\@curveinput\@@input}

\newcommand\makerubric[1]{\LTXtable{\textwidth}{#1}}

\let\newblock\par
\newcounter{bibcount}
\def\@lbibitem[#1]#2{\entry*[\@biblabel{#1}]%
  \if@filesw{%
    \let\protect\noexpand%
    \immediate\write\@auxout{\string\bibcite{#2}{#1}}}
  \fi%
  \ignorespaces}
\def\@bibitem#1{\entry*[\stepcounter{bibcount}\@biblabel{\thebibcount}]%
  \if@filesw%
    \immediate\write\@auxout{\string\bibcite{#1}{\thebibcount}}%
  \fi%
  \ignorespaces}

\def\bibliography#1{%
  \if@filesw
    \immediate\write\@auxout{\string\bibdata{#1}}%
  \fi
  \makerubric{\jobname.bbl}}

\newcommand\listpubname[1]{\gdef\@listpubname{#1}}
\newenvironment{thebibliography}[1]{%
  \begin{rubric}{\@listpubname}
  }{%
  \end{rubric}
}

\DeclareOption{english}{%
  \continuedname{~(continued)}
  \listpubname{List of Publications}}
\DeclareOption{french}{%
  \continuedname{~(suite)}
  \listpubname{Liste des Publications}}
\DeclareOption{francais}{%
  \ExecuteOptions{french}}
\DeclareOption{spanish}{%
  \continuedname{~(contin\'ua)}
  \listpubname{Lista de Publicaciones}}
\DeclareOption{italian}{%
  \continuedname{~(continua)}
  \listpubname{Pubblicazioni}}
\DeclareOption{german}{%
  \continuedname{~(fortgesetzt)}
  \listpubname{Verzeichnis der Ver\"offentlichungen}}
\DeclareOption{ngerman}{%
  \ExecuteOptions{german}}
\DeclareOption{danish}{%
  \continuedname{~(forsat)}
  \listpubname{Udgivelser}}

\DeclareOption{a4paper}{
  \setlength\paperheight{297mm}
  \setlength\paperwidth{210mm}}
\DeclareOption{a5paper}{
  \setlength\paperheight{210mm}
  \setlength\paperwidth{148mm}}
\DeclareOption{b5paper}{
  \setlength\paperheight{250mm}
  \setlength\paperwidth{176mm}}
\DeclareOption{letterpaper}{
  \setlength\paperheight{11in}
  \setlength\paperwidth{8.5in}}
\DeclareOption{legalpaper}{
  \setlength\paperheight{14in}
  \setlength\paperwidth{8.5in}}
\DeclareOption{executivepaper}{
  \setlength\paperheight{10.5in}
  \setlength\paperwidth{7.25in}}
\DeclareOption{landscape}{
  \setlength\@tempdima{\paperheight}
  \setlength\paperheight{\paperwidth}
  \setlength\paperwidth{\@tempdima}}

\DeclareOption{10pt}{\def\@ptsize{0}}
\DeclareOption{11pt}{\def\@ptsize{1}}
\DeclareOption{12pt}{\def\@ptsize{2}}

\DeclareOption{draft}{\setlength\overfullrule{5pt}}
\DeclareOption{final}{%
  \setlength\overfullrule{0pt}
  \setlongtables}

\ExecuteOptions{letterpaper,10pt,english,final}
\ProcessOptions

\input{size1\@ptsize.clo}
\setlength\parindent{0pt}
\setlength\parskip{0pt}
\setlength\tabcolsep{10pt}
\raggedbottom
\onecolumn

\endinput
%%
%% End of file `curve.cls'.