Many thanks to Sven for these tests!
Note: Voltages measured for different DAC setting were obtained with a load generator at the end of a PP0 cable hooked up to the SURF board. Hence they include the voltage drop in the PP0 cable, and are close to what a module hooked up to the SURF board would see.
|
Serial number |
200402LBL001 |
200402LBL002 |
200402LBL003 |
|
Firmware revision |
00.05.02 |
00.05.02 |
00.05.02 |
|
Current draw with nothing enabled (board/IDD/IDDA) |
100 mA / 1 mA / 0 mA |
117 mA / 1 mA / 0 mA |
118 mA / 1 mA / 0 mA |
| USB system |
OK |
OK |
OK |
| USB hub |
OK |
OK |
OK |
| DACs/ADCs calibrated |
yes |
yes |
yes |
$Id: surf-list.html,v 1.1 2004/02/16 07:29:51 jmuelmen Exp $